Dent Pro 55075
Paintless Dent Repair (PDR), additionally called paintless damage removal, describes a method of eliminating small damages from the body of a car. A variety of damage can be repaired utilizing Paintless Dent Repair as long as the paint surface area is intact. Paintless Dent Repair (PDR) might be used on both aluminum as well as steel panels.
The most common useful use for Paintless Dent Repair (PDR) is the repair service of hail storm damages, door dings, minor folds, huge dents as well as bodylines damages.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as “push to paint” or “push to prep”.
Limiting elements for a successful fixing using Paintless Dent Repair (PDR) consist of the adaptability of the paint (the majority of today's refined automotive paint surfaces allow for successful PDR) and the level to which the steel has been extended by the damage, which relies on the density of the steel, the curvature or monotony where the damage occurred as well as the strength of the impact. Normally talking, the shallower the damage, the greater the possibility of paintless dent repair being a suitable option. Also damages a number of inches in diameter can be fixed by this technique as long as the steel and paint are not extended. A lot of seasoned technicians can repair a superficial big dent or fold to an acceptable degree, but really sharp dents and creases might not appropriate for Paintless Dent Repair (PDR)..
Paintless Dent Removal Technics | Dent Pro South Saint Paul MN
The most common PDR techniques utilize metal rods and body picks to push out the dents from the underside of the body panel. Glue and specially designed tabs may be used to pull out the dents from the outside of the panel. Fine tuning the repair often involves tapping down the repair to remove small high spots. Quality specialists can mix high areas to match the appearance of the paint called orange peel. Pressing too hard can produce high places that create the clear layer as well as paint to break or divide. Experienced professionals can avoid breaking or fracturing with the use of warmth, although a re-painted surface has a greater possibility of cracking. In addition, it is unwise to "glue pull" a repainted panel, due to the fact that you risk also pulling non factory paint off. When damage is so wonderful that body filler is needed, a Paintless Dent Repair service technician may "push to repaint", fixing the majority of the damages before minor dental filling, sanding, and painting, consequently saving time and expense.
Dent Pro Process
The Dent Pro process of paintless dent repair needs a service technician to adjust accurate locations of metal to the proper elevation, which can only be observed by the use of a Paintless Dent Repair analysis tool such as a paintless dent repair light. LED or fluorescent lighting, or sometimes a reflection board, may be utilized to imagine the contortion of the damage and to aid the specialist in locating the suggestion of the tool being utilized to push the steel. Without a representation from a source of light or board to review the dent, the great information of the process may not appropriate for the technician.
A Smart Auto Body Shop To Repair Your Car When Necessary.
An auto repaired using Dent Pro techniques can be returned to its original shape without using paint or fillers, and the repair can be done more quickly and less expensively than with body shop techniques. Typically, Park Auto Body will not keep your vehicle more than 3 days to complete the dent removal process.
Dent Pro | Collision | Dent Repair
We remove door dings, creases, hail damage, and dents from your vehicle while keeping the original paint job intact. Drop your car off at our shop in South Saint Paul MN, or have us come to you! We offer both in-shop and mobile services throughout the Twin Cities metro area. Dent Pro South Saint Paul MN
What Is PDR (Paintless Dent Repair)
Paintless dent repair (PDR), also known as paintless dent removal, describes a method of removing minor dents from the body of a motor vehicle. A wide range of damage can be repaired using paintless dent repair as long as the paint surface is intact. Paintless dent repair may be used on both aluminum and steel panels.
The most common practical use for paintless dent repair is the repair of hail damage, door dings, minor creases, large dents and bodylines damage.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as "push to paint" or "push to prep".
Limiting factors for a successful repair using paintless dent repair include the flexibility of the paint (most of today's refined automotive paint finishes allow for successful PDR) and the extent to which the metal has been stretched by the damage, which depends on the thickness of the metal, the curvature or flatness where the damage occurred and the intensity of the impact. Generally speaking, the shallower the dent, the greater the likelihood of paintless dent repair being a suitable option. Even dents several inches in diameter can be repaired by this method as long as the metal and paint are not stretched. It is possible to repair a shallow large dent or crease to an acceptable level, but very sharp dents and creases may not be suitable for paintless dent repair.
We proudly service the South Saint Paul Minnesota area.
|South St. Paul is a city in Dakota County, Minnesota, immediately south and southeast of Saint Paul, Minnesota. It is also east of West St. Paul, Minnesota. The population was 20,160 at the 2010 census. Historically, the town was notable as a major meat-packing location.|
Body Collision Repair
Quality Craftmanship - Dent Pro.
Dent Pro South Saint Paul Minnesota.
“Great service, brandon went above and beyond when he worked on a vehicle we sent out there for cosmetic repairs.“
“Wow! These guys are great! Jerry is so reliable and honest and great at what he does! We have used Park Auto many times and have recommended them to others who have also had a great experience.“