Dent Pro 55398
Paintless Dent Repair (PDR), additionally referred to as paintless damage elimination, defines a method of getting rid of minor damages from the body of a car. A wide variety of damage can be fixed using Paintless Dent Repair as long as the paint surface is undamaged. Paintless Dent Repair (PDR) may be used on both aluminum and also steel panels.
The most typical useful use for Paintless Dent Repair (PDR) is the repair service of hail damages, door dings, minor folds, huge dents and bodylines damage.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as “push to paint” or “push to prep”.
Limiting factors for a successful repair work using Paintless Dent Repair (PDR) consist of the adaptability of the paint (a lot of today's polished automotive paint surfaces enable effective PDR) and also the level to which the steel has been extended by the damage, which depends on the thickness of the metal, the curvature or flatness where the damage took place as well as the strength of the impact. Generally speaking, the shallower the damage, the higher the chance of paintless dent repair being an ideal option. Also damages several inches in size can be repaired by this technique as long as the steel as well as paint are not extended. Many knowledgeable technicians can repair a superficial big damage or crease to an appropriate degree, but very sharp dents and creases might not appropriate for Paintless Dent Repair (PDR)..
Paintless Dent Removal Technics | Dent Pro Zimmerman MN
The most common PDR techniques utilize metal rods and body picks to push out the dents from the underside of the body panel. Glue and specially designed tabs may be used to pull out the dents from the outside of the panel. Fine tuning the repair often involves tapping down the repair to remove small high spots. Quality specialists can mix high spots to match the appearance of the paint called orange peel. Pressing too hard can develop high areas that trigger the clear coat and also paint to split or crack. Experienced technicians can prevent splitting or cracking with the use of heat, although a re-painted surface has a better possibility of cracking. Additionally, it is ill-advised to "adhesive pull" a painted panel, since you run the risk of additionally pulling non factory paint off. When damage is so wonderful that body filler is necessary, a Paintless Dent Repair service technician may "press to paint", resolving the majority of the damage prior to small dental filling, sanding, as well as paint, therefore conserving time and expense.
Dent Pro Process
The Dent Pro procedure of paintless dent repair calls for a specialist to control specific locations of steel to the proper elevation, which can only be observed by the use of a Paintless Dent Repair reading tool such as a paintless dent repair light. Fluorescent or LED lighting, or in some cases a reflection board, may be utilized to imagine the deformation of the dent and also to help the professional in situating the pointer of the device being utilized to press the steel. Without a representation from a light or board to check out the dent, the great information of the process might not be suitable for the technician.
A Smart Auto Body Shop To Repair Your Car When Necessary.
An auto repaired using Dent Pro techniques can be returned to its original shape without using paint or fillers, and the repair can be done more quickly and less expensively than with body shop techniques. Typically, Park Auto Body will not keep your vehicle more than 3 days to complete the dent removal process.
Dent Pro | Collision | Dent Repair
We remove door dings, creases, hail damage, and dents from your vehicle while keeping the original paint job intact. Drop your car off at our shop in Zimmerman MN, or have us come to you! We offer both in-shop and mobile services throughout the Twin Cities metro area. Dent Pro Zimmerman MN
What Is PDR (Paintless Dent Repair)
Paintless dent repair (PDR), also known as paintless dent removal, describes a method of removing minor dents from the body of a motor vehicle. A wide range of damage can be repaired using paintless dent repair as long as the paint surface is intact. Paintless dent repair may be used on both aluminum and steel panels.
The most common practical use for paintless dent repair is the repair of hail damage, door dings, minor creases, large dents and bodylines damage.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as "push to paint" or "push to prep".
Limiting factors for a successful repair using paintless dent repair include the flexibility of the paint (most of today's refined automotive paint finishes allow for successful PDR) and the extent to which the metal has been stretched by the damage, which depends on the thickness of the metal, the curvature or flatness where the damage occurred and the intensity of the impact. Generally speaking, the shallower the dent, the greater the likelihood of paintless dent repair being a suitable option. Even dents several inches in diameter can be repaired by this method as long as the metal and paint are not stretched. It is possible to repair a shallow large dent or crease to an acceptable level, but very sharp dents and creases may not be suitable for paintless dent repair.
We proudly service the Zimmerman Minnesota area.
Body Collision Repair
Quality Craftmanship - Dent Pro.
Dent Pro Zimmerman Minnesota.
“Great service, brandon went above and beyond when he worked on a vehicle we sent out there for cosmetic repairs.“
“Wow! These guys are great! Jerry is so reliable and honest and great at what he does! We have used Park Auto many times and have recommended them to others who have also had a great experience.“