Dent Pro 55313
Paintless Dent Repair (PDR), also called paintless dent elimination, defines an approach of getting rid of small dents from the body of a motor vehicle. A wide range of damage can be repaired using Paintless Dent Repair as long as the paint surface area is undamaged. Paintless Dent Repair (PDR) may be used on both light weight aluminum and steel panels.
One of the most typical useful use for Paintless Dent Repair (PDR) is the repair work of hail damage, door dings, small creases, large dents and also bodylines damage.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as “push to paint” or “push to prep”.
Restricting aspects for an effective repair using Paintless Dent Repair (PDR) include the versatility of the paint (the majority of today's refined automotive paint surfaces enable successful PDR) and the level to which the metal has been extended by the damages, which relies on the thickness of the steel, the curvature or monotony where the damage took place and the intensity of the effect. Normally talking, the shallower the damage, the better the possibility of paintless dent repair being a suitable choice. Even damages several inches in size can be repaired by this method as long as the metal and paint are not stretched. A lot of knowledgeable professionals can repair a shallow large damage or fold to an appropriate degree, yet extremely sharp damages as well as creases may not appropriate for Paintless Dent Repair (PDR)..
Paintless Dent Removal Technics | Dent Pro Hanover MN
The most common PDR techniques utilize metal rods and body picks to push out the dents from the underside of the body panel. Glue and specially designed tabs may be used to pull out the dents from the outside of the panel. Fine tuning the repair often involves tapping down the repair to remove small high spots. Quality specialists can blend high places to match the structure of the paint called orange peel. Pressing too hard can develop high spots that cause the clear coat and paint to split or crack. Experienced service technicians can avoid damaging or splitting with making use of warmth, although a re-painted surface area has a higher possibility of breaking. Moreover, it is ill-advised to "glue pull" a repainted panel, because you run the risk of additionally drawing non factory paint off. When damages is so terrific that body filler is needed, a Paintless Dent Repair professional may "push to paint", dealing with the majority of the damages before minor filling, sanding, as well as paint, consequently conserving time and price.
Dent Pro Process
The Dent Pro procedure of paintless dent repair needs a technician to adjust exact places of metal to the proper height, which can only be observed by the use of a Paintless Dent Repair reading tool such as a paintless dent repair light. Fluorescent or LED lights, or sometimes a representation board, may be used to picture the deformation of the damage and also to assist the professional in finding the pointer of the device being used to press the steel. Without a representation from a light source or board to read the dent, the fine information of the procedure might not be suitable for the professional.
A Smart Auto Body Shop To Repair Your Car When Necessary.
An auto repaired using Dent Pro techniques can be returned to its original shape without using paint or fillers, and the repair can be done more quickly and less expensively than with body shop techniques. Typically, Park Auto Body will not keep your vehicle more than 3 days to complete the dent removal process.
Dent Pro | Collision | Dent Repair
We remove door dings, creases, hail damage, and dents from your vehicle while keeping the original paint job intact. Drop your car off at our shop in Hanover MN, or have us come to you! We offer both in-shop and mobile services throughout the Twin Cities metro area. Dent Pro Hanover MN
What Is PDR (Paintless Dent Repair)
Paintless dent repair (PDR), also known as paintless dent removal, describes a method of removing minor dents from the body of a motor vehicle. A wide range of damage can be repaired using paintless dent repair as long as the paint surface is intact. Paintless dent repair may be used on both aluminum and steel panels.
The most common practical use for paintless dent repair is the repair of hail damage, door dings, minor creases, large dents and bodylines damage.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as "push to paint" or "push to prep".
Limiting factors for a successful repair using paintless dent repair include the flexibility of the paint (most of today's refined automotive paint finishes allow for successful PDR) and the extent to which the metal has been stretched by the damage, which depends on the thickness of the metal, the curvature or flatness where the damage occurred and the intensity of the impact. Generally speaking, the shallower the dent, the greater the likelihood of paintless dent repair being a suitable option. Even dents several inches in diameter can be repaired by this method as long as the metal and paint are not stretched. It is possible to repair a shallow large dent or crease to an acceptable level, but very sharp dents and creases may not be suitable for paintless dent repair.
We proudly service the Hanover Minnesota area.
Body Collision Repair
Quality Craftmanship - Dent Pro.
Dent Pro Hanover Minnesota.
“Great service, brandon went above and beyond when he worked on a vehicle we sent out there for cosmetic repairs.“
“Wow! These guys are great! Jerry is so reliable and honest and great at what he does! We have used Park Auto many times and have recommended them to others who have also had a great experience.“