Dent Pro 55014
Paintless Dent Repair (PDR), also referred to as paintless dent removal, explains an approach of getting rid of small damages from the body of an automobile. A large range of damages can be repaired using Paintless Dent Repair as long as the paint surface is undamaged. Paintless Dent Repair (PDR) may be made use of on both light weight aluminum and steel panels.
The most common sensible usage for Paintless Dent Repair (PDR) is the repair of hail storm damage, door dings, small creases, big dents as well as bodylines damages.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as “push to paint” or “push to prep”.
Limiting factors for an effective repair making use of Paintless Dent Repair (PDR) consist of the adaptability of the paint (the majority of today's refined auto paint coatings permit successful PDR) and also the degree to which the steel has actually been extended by the damages, which depends upon the density of the metal, the curvature or flatness where the damage took place as well as the strength of the effect. Normally speaking, the shallower the damage, the greater the probability of paintless dent repair being a suitable option. Even damages several inches in size can be repaired by this technique as long as the steel and also paint are not extended. Many experienced professionals can fix a superficial big dent or fold to an appropriate degree, but extremely sharp damages as well as creases may not be suitable for Paintless Dent Repair (PDR)..
Paintless Dent Removal Technics | Dent Pro Lexington MN
The most common PDR techniques utilize metal rods and body picks to push out the dents from the underside of the body panel. Glue and specially designed tabs may be used to pull out the dents from the outside of the panel. Fine tuning the repair often involves tapping down the repair to remove small high spots. Quality service technicians can blend high spots to match the appearance of the paint called orange peel. Pressing too hard can create high spots that trigger the clear coat and also paint to divide or break. Experienced technicians can avoid damaging or cracking with making use of heat, although a re-painted surface has a higher possibility of breaking. Moreover, it is ill-advised to "glue pull" a painted panel, due to the fact that you risk also pulling non factory paint off. When damage is so fantastic that body filler is essential, a Paintless Dent Repair specialist may "press to repaint", resolving most of the damage prior to small dental filling, fining sand, and painting, therefore conserving time as well as expense.
Dent Pro Process
The Dent Pro process of paintless dent repair calls for a specialist to control precise areas of steel to the appropriate height, which can just be observed by the use a Paintless Dent Repair analysis tool such as a paintless dent repair light. LED or fluorescent illumination, or in some cases a reflection board, might be utilized to imagine the deformation of the dent and also to aid the service technician in locating the suggestion of the device being made use of to press the metal. Without a representation from a light source or board to read the dent, the great detail of the process might not appropriate for the specialist.
A Smart Auto Body Shop To Repair Your Car When Necessary.
An auto repaired using Dent Pro techniques can be returned to its original shape without using paint or fillers, and the repair can be done more quickly and less expensively than with body shop techniques. Typically, Park Auto Body will not keep your vehicle more than 3 days to complete the dent removal process.
Dent Pro | Collision | Dent Repair
We remove door dings, creases, hail damage, and dents from your vehicle while keeping the original paint job intact. Drop your car off at our shop in Lexington MN, or have us come to you! We offer both in-shop and mobile services throughout the Twin Cities metro area. Dent Pro Lexington MN
What Is PDR (Paintless Dent Repair)
Paintless dent repair (PDR), also known as paintless dent removal, describes a method of removing minor dents from the body of a motor vehicle. A wide range of damage can be repaired using paintless dent repair as long as the paint surface is intact. Paintless dent repair may be used on both aluminum and steel panels.
The most common practical use for paintless dent repair is the repair of hail damage, door dings, minor creases, large dents and bodylines damage.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as "push to paint" or "push to prep".
Limiting factors for a successful repair using paintless dent repair include the flexibility of the paint (most of today's refined automotive paint finishes allow for successful PDR) and the extent to which the metal has been stretched by the damage, which depends on the thickness of the metal, the curvature or flatness where the damage occurred and the intensity of the impact. Generally speaking, the shallower the dent, the greater the likelihood of paintless dent repair being a suitable option. Even dents several inches in diameter can be repaired by this method as long as the metal and paint are not stretched. It is possible to repair a shallow large dent or crease to an acceptable level, but very sharp dents and creases may not be suitable for paintless dent repair.
We proudly service the Lexington Minnesota area.
Body Collision Repair
Quality Craftmanship - Dent Pro.
Dent Pro Lexington Minnesota.
“Great service, brandon went above and beyond when he worked on a vehicle we sent out there for cosmetic repairs.“
“Wow! These guys are great! Jerry is so reliable and honest and great at what he does! We have used Park Auto many times and have recommended them to others who have also had a great experience.“