Fix A Dent 55014
Paintless Dent Repair (PDR), likewise called paintless damage elimination, describes an approach of removing small damages from the body of a motor vehicle. A wide variety of damages can be fixed using Paintless Dent Repair as long as the paint surface is undamaged. Paintless Dent Repair (PDR) may be utilized on both light weight aluminum as well as steel panels.
One of the most typical sensible use for Paintless Dent Repair (PDR) is the repair of hailstorm damage, door dings, minor folds, big damages and also bodylines damage.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as “push to paint” or “push to prep”.
Limiting factors for an effective repair service using Paintless Dent Repair (PDR) consist of the flexibility of the paint (a lot of today's refined automotive paint coatings allow for effective PDR) and also the extent to which the steel has actually been extended by the damage, which depends on the density of the metal, the curvature or monotony where the damages occurred as well as the strength of the effect. Typically speaking, the shallower the dent, the greater the likelihood of paintless dent repair being a suitable alternative. Also dents a number of inches in size can be repaired by this approach as long as the steel as well as paint are not stretched. The majority of seasoned service technicians can repair a superficial big dent or crease to an acceptable level, yet extremely sharp dents and folds might not appropriate for Paintless Dent Repair (PDR)..
Paintless Dent Removal Technics | Fix A Dent Lexington MN
The most common PDR techniques utilize metal rods and body picks to push out the dents from the underside of the body panel. Glue and specially designed tabs may be used to pull out the dents from the outside of the panel. Fine tuning the repair often involves tapping down the repair to remove small high spots. Quality specialists can mix high places to match the structure of the paint called orange peel. Pressing too hard can create high spots that cause the clear coat and paint to divide or split. Experienced technicians can avoid fracturing or cracking with the use of heat, although a re-painted surface area has a greater chance of cracking. Moreover, it is reckless to "glue pull" a repainted panel, due to the fact that you run the risk of additionally drawing non factory paint off. When damages is so wonderful that body filler is needed, a Paintless Dent Repair technician might "press to repaint", solving a lot of the damage prior to small filling, fining sand, and painting, thus conserving time as well as price.
Fix A Dent Process
The Fix A Dent process of paintless dent repair calls for a specialist to control precise places of metal to the proper height, which can only be observed by the use a Paintless Dent Repair analysis tool such as a paintless dent repair light. LED or fluorescent lights, or in many cases a reflection board, may be used to envision the deformation of the damage and also to help the professional in situating the pointer of the tool being made use of to push the steel. Without a reflection from a source of light or board to read the damage, the great information of the procedure might not appropriate for the service technician.
A Smart Auto Body Shop To Repair Your Car When Necessary.
An auto repaired using Fix A Dent techniques can be returned to its original shape without using paint or fillers, and the repair can be done more quickly and less expensively than with body shop techniques. Typically, Park Auto Body will not keep your vehicle more than 3 days to complete the dent removal process.
Fix A Dent | Collision | Dent Repair
We remove door dings, creases, hail damage, and dents from your vehicle while keeping the original paint job intact. Drop your car off at our shop in Lexington MN, or have us come to you! We offer both in-shop and mobile services throughout the Twin Cities metro area. Fix A Dent Lexington MN
What Is PDR (Paintless Dent Repair)
Paintless dent repair (PDR), also known as paintless dent removal, describes a method of removing minor dents from the body of a motor vehicle. A wide range of damage can be repaired using paintless dent repair as long as the paint surface is intact. Paintless dent repair may be used on both aluminum and steel panels.
The most common practical use for paintless dent repair is the repair of hail damage, door dings, minor creases, large dents and bodylines damage.
The method can also be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as "push to paint" or "push to prep".
Limiting factors for a successful repair using paintless dent repair include the flexibility of the paint (most of today's refined automotive paint finishes allow for successful PDR) and the extent to which the metal has been stretched by the damage, which depends on the thickness of the metal, the curvature or flatness where the damage occurred and the intensity of the impact. Generally speaking, the shallower the dent, the greater the likelihood of paintless dent repair being a suitable option. Even dents several inches in diameter can be repaired by this method as long as the metal and paint are not stretched. It is possible to repair a shallow large dent or crease to an acceptable level, but very sharp dents and creases may not be suitable for paintless dent repair.
Services We Offer Near Lexington Minnesota:
We proudly service the Lexington Minnesota area.
Body Collision Repair
Quality Craftmanship - Fix A Dent.
Fix A Dent
Fix A Dent Lexington Minnesota.
“Great service, brandon went above and beyond when he worked on a vehicle we sent out there for cosmetic repairs.“
“Wow! These guys are great! Jerry is so reliable and honest and great at what he does! We have used Park Auto many times and have recommended them to others who have also had a great experience.“